Hotel furniture as a hotel hardware foundation, it can intuitively reflect the comprehensive strength of a hotel level, but also allows customers to make a judgment on the hotel in the sensory.

So, in the hotel furniture production process, the hotel should pay attention to what details in order to improve the comfort of customers to stay?

Hotel furniture production standards

Fine selection of materials for the surface of the product material does not allow any wood defects, wood color and lustre uniformity, no blue change, decay, seasonal cracks, cracks, insect moths, etc.; non-exposed surfaces can be allowed to have minor defects, the area of the dead joints can not be more than 10mm, 10mm or less allowed to fill in the solid wood repairs, the color should be matched to make the paint without obvious traces.

Material processing in strict accordance with the sample and drawings, the processing of the first inspection system is strictly enforced, the processing of parts of the cross-section of the neat, cut corners of the parts, groove corners, holes in the edge, and the line is flat and smooth, there is no burr, chipping, jumping knife, the phenomenon of wave prints, boards on the front edge of the edge of the uniformly rounded corners, feel good, the sealing tape and boards pasted tightly, can not see the glue marks. Mortise and tenon and mortise and tenon hole connection should be close with no gap, drawer, cabinet door between the seam does not exceed 1.5mm; painting process must be strictly in accordance with the color plate for the production, the coating film is full, smooth, smooth, no roughness, shedding and other phenomena.

Process requirements based on the actual situation of flexible adjustment, in-process and product quality control by the self-inspection, inspection, inter-process quality control, inter-departmental handover quality control, trial installation quality control, final inspection control; self-inspection, inspection, inter-process quality control, trial installation by the department head of the products in progress, the quality of the director of the completion of the supervision; departmental handover by the department head of the supervision of the handover, handover, the receiver to complete the number of quality confirmations, the supervisor to check the signatures.

Furniture production throughout the production process is composed of a number of processes, the stability of process quality involves people, machines, materials, process methods, testing and environmental factors, these factors, especially the dominant factor such as change, will directly affect the stability of process quality. According to the configuration of the process parameters of each process selection, equipment management should pay attention to the details and production operations of some of the actual experience, to solve the production quality problems in the production process of production of some of the methods used to develop the appropriate quality control program, so that it can be stable, continuous production of furniture products in line with the quality standards, and can ensure the continuity of qualified products.

Quality control management focus:

1, the preparation of process regulations: according to the characteristics of the furniture production process, the use of refined process stacking preparation method, the key or important drawing size, technical requirements written in the process name column, if necessary, add the "internal control standards", into the process regulations.

2, process quality control: the use of various methods and statistical tools to determine and eliminate quality fluctuations caused by systematic factors to ensure that the fluctuations in process quality is limited to the required limits.

3, process quality control points: the need to focus on controlling the quality characteristics, key areas, weak links, and dominant factors, etc., to take special management measures and methods, the implementation of enhanced management, so that the process is in a good state of control, according to the quality characteristics of the value of the impact of the entire project quality to determine the degree of quality control points.

4, the main process factors quality control: in production to strengthen the process of key pieces, important pieces of manufacturing in the rigorous examination of the work, the development of the corresponding quality control program, in order to be able to stabilize and sustain the production of products in line with the quality of products, and can ensure the continuity of qualified products.

If you want to learn more, you can pay attention to China Home Expo.

Source: Weilong Furniture

If there is any infringement, contact to delete.